How can you un-crease a foldable projector screen? - creased projector screen
I have a folding screen, but I have not used long and full of wrinkles. Then I iron with a towel on his head or is it some other way?
Sunday, January 31, 2010
Creased Projector Screen How Can You Un-crease A Foldable Projector Screen?
3 comments:
I have pads on the fold. Then place the iron on "steam" and run a thumb along the crease, but without touching them. I would for several passes until the material is warm, almost hot, and most of the steam. Place a thin towel in his lap, then run the tip of the iron content in the extract in the womb. Not much pressure. Lift the towel to see if it works, and when to continue running at the head until you have completed the door. If there is a molded glass screen, they can not work, but I would try.
perhaps, or trying to hang in the sun to soften a little, so if you have room, leave a little flat, with something like books, etc.. on the gently ease back into shape.
Take time to get to work
I agree with the answer to William C. "Steam and depend" on the screen. Over time, cheer / anti-wrinkle.
Good luck!
Post a Comment